We use cookies to improve your online experience. By continuing browsing this website, we assume you agree our use of cookies.

ROCK AND CONCRETE SPLITTER C12

Views : 164
Update time : 2023-11-14 15:09:10

CUTTING OF CONCRETE PILLARS
IN 5 MINUTES

When cutting reinforced concrete pillars, difficulties often arise regarding the tools and the method used to work efficiently and quickly. The reason for this is their time-honored construction method. The steel reinforcement is usually located at the edge of the concrete pillar, and its size and load-bearing capacity determine its diameter. Probably, the requirements of later demolition are never thought of when the piers are made.

 

SPLITTING EQUIPMENT –
THE BEST SOLUTION!

A variety of methods are used for demolition of reinforced concrete piers – which usually have a reinforcement of 32 mm diameter in the edge area of the round pier. Rock and Concrete Splitters have so far proven to be the best solution for demolition of piers. They are powerful -even under water- and work silently with low vibration.

 

ADVANTAGES OF
THE SPLITTING UNIT

Compared to conventional methods, the Darda splitting unit offers significant advantages:

(a)  No vibration: the application is noiseless and free from vibration. The strength and rigidity of the pillar are not affected.

(b)  Precision: The pillar can be split exactly at the desired point.

(c)  Very fast: Compared to days required by conventional methods, the Darda splitter takes only a few minutes to smoothly split a pier.

(d)  Economical: The most cost effective method due to its quick execution.

(e)  Safe: No flying debris as with other methods.

(f) Safe: No flying debris as with other methods.

 

CONSIDER DEMOLITION AS EARLY
AS THE MANUFACTURING STAGE

By taking into account the demolition that will be required at a later date during pier fabrication, the effort required to do so can be greatly reduced and simplified.
The procedure explained below takes these requirements into account and is widely used in most countries.

 

PRODUCTION OF REINFORCED
CONCRETE PIERS

The following method of construction is suggested for reinforced concrete piers:

(a) The insertion of a PVC strip or other bond breaker around the reinforcement along its entire length, and staggering the steel bars to the perimeter of the reinforced concrete pier.

(b) The insertion of a 44-46 mm diameter rigid PVC pipe across the diameter of the pier (ID), directly at the bottom of the pier section to be removed. The wall thickness of the pipe should be approximately 5 mm.

(c) The insertion of a lifting eye of sufficient size and strength at the head and center of the pier to facilitate lifting by crane.
ROCK AND CONCRETE SPLITTER C12

CLEAN DEMOLITION
AND REMOVAL

The proposed construction method for the pier allows for easy demolition using a Rock and Concrete Splitter. This method greatly simplifies the demolition of piers.

Demolition is accomplished in the following steps:

(a) If the pier is to be demolished, splitting equipment is used at both ends of the thin steel tube (embedded in the bottom of the pier, across the diameter of the pier section at the time of fabrication).

(b) Operate both splitting devices simultaneously to produce a clean split across the entire cross section of the pier.

(c) Attach the hook of a crane of sufficient capacity to the lifting eye at the head of the pier.

(d) Once a gap has formed in the pier around its entire circumference and it separates from the lower portion (due to the PVC strip around the reinforcing bars), the concrete will separate from the steel bars and the pier can be cleanly separated from its base and disposed of at the dump site.

(e) The steel reinforcement can be cut out later with a welder.



Related News
Read More >>
What is the principle of carbon dioxide CO2  gas blasting to crack rocks? What is the principle of carbon dioxide CO2 gas blasting to crack rocks?
Jun .26.2024
What is the principle of carbon dioxide CO2  gas blasting to crack rocks?
Carbon dioxide  CO2  gas blasting is a technology that uses high-pressure carbon dioxide gas to apply huge pressure to rocks, and in this way, rocks are blasted and broken. This technology uses the characteristics and principles of carbon dioxide gas to crack rocks through the pressure difference generated inside the rock while applying high pressure.
Excavator drilling and splitting machine instructions Excavator drilling and splitting machine instructions
Jun .26.2024
Application scope of large-scale airborne hydraulic rock splitter Instructions for use of excavator drilling and splitting machine
The integrated drilling rig is a new type of highly integrated, efficient and environmentally friendly equipment that can be widely used in complex working conditions such as open-pit mines, engineering construction, and tunnel excavation.
Reinforced concrete crushing and demolition Reinforced concrete crushing and demolition
Jun .26.2024
This article mainly introduces several tools and methods for reinforced concrete demolition and blasting: hydraulic crushing shears, hydraulic crushing shears, hydraulic pile breaker, etc.
The difference between pneumatic pick and electric pick The difference between pneumatic pick and electric pick
Jun .26.2024
Pneumatic pick is driven by wind and is a type of pneumatic tool.
Electric pick is driven by electricity and is a type of electric tool.